RADWAG MAS 1. Y, Руководство пользователя

Страница: 151 / 201

- 151 -
32.5. Additional Display
Communication between the weighing device and the additional display can be established
via the following ports:
−
RS 232 (COM1)
−
RS 232 (COM2)
−
TCP
Type of data displayed on an additional display is declared in <Project> variable.
Procedure – designing a variable:
•
Enter < Peripherals> submenu.
•
Select < Additional display/ Project> parameter, a <Project> edit box with an
on-screen keyboard is displayed.
•
Use the on-screen keyboard to insert desired value of a project, or press < >
button and select respective value from the list.
•
Press button to confirm.
CAUTION:
The balance cooperates with RADWAG WD5/3Y additional display. In order to ensure
correct cooperation between the balance and the additional display, set {140} variable for
< Project> parameter , next set 38400 bits/s baud rate for a port to which the additional
display is connected.
32.6. Ambient Conditions Module
Ambient conditions module (THB) can be connected to the balance via COM 1 or COM 2
port. In order to provide correct cooperation enter module’s address and baud rate for the
port (port settings) to which the ambient conditions module is connected (the address and
baud rate are to be found on an ambient conditions module data plate).
32.7. Automatic Feeder
(mode not available in balance’s standard version)
Communication between the weighing device and the automatic feeder can be established
via the following ports:
−
RS 232 (COM1)
−
RS 232 (COM2)
−
Com internal.
To ensure correct cooperation with the feeder, set its address (the address and baud rate
are to be found on an automatic feeder data plate).
33. INPUTS/OUTPUTS
Application of inputs:
The set of inputs is used to control module’s operation. The following functions or keys can
be assigned to each of 4 inputs:
o
Checkweighing thresholds
o
Right door
o
Target value
o
Parameters