.
.
, ,
.
, !, , .
" #
.
"o ! .
$ ,
% ,
Push.
$
.
& ! %,
. "
.
.
!!"#$#
' %
.
!
% ! !
(! ( ! !:
EN50144-1, EN50144-2-10,
EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3
( ! ! () ! (!
!:
98/37/EEC
73/23/EEC
89/336/EEC
01-12-2002
GENEMUIDEN NL
W. Kamphof
Quality department
CE
ı
%#&$# $"'('#'$
(GR)
66
Push
Jigsaw
THE NUMBERS IN THE FOLLOWING TEXT COR-
RESPOND WITH THE PICTURES AT PAGE 2.
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
1 Jigsaw appliance
1 1 saw blade
1 Allen key
1 Vacuum cleaner adapter
1 User manual
1 Warranty card
1 Safety advice
Check the machine and accessories for transport
damage.
PRODUCTINFORMATION
Fig. 1 - Description
1. Interlocking
knob
2. Switch
3. Connection point vacuum cleaner
4. Allen
key
5. Bottom
plate
6. Saw
buckle
7. Guard
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
Electrical safety
Warning! When using electric tools, basic safety pre-
cautions should always be followed to reduce the
risk of fire, electric shock and personal injury. Read
all these instructions before attempting to operate
this product and save these instructions.
Always check that the voltage corresponds to the
voltage on the rating plate.
The machine is double insulated in accordance
with EN50144; therefore no earth wire is
required.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor
size is 1.5 mm
2
. When using a cable reel always unwind
the reel completely.
SPECIAL SAFETY INSTRUCTIONS
BEFORE USING THE APPLIANCE
1. Check the following points:
•
Does the voltage of the motor (230 V) corres-
pond with the mains voltage?
•
Are the feeder cable and plug in good condition:
sturdy, without loose bits or damage?
•
Has the saw lost any teeth and is it showing cracks
or fractures?
•
If so, replace the saw immediately.
•
Is there enough room under the workpiece so
that the saw does not come into contact with the
floor or work table as it moves up and down?
•
Do the teeth of the saw point upwards?
2. Always wear protective goggles when using the appli-
ance.
3. Maintain the appliance carefully.
4. Do not use the appliance in a wet environment.
5. Do not use the appliance for material which contains
asbestos.
6. Never leave the jigsaw unattended.
Check that the switch is not interlocked in the ‘on’
position
USING THE APPLIANCE
1. Clamp the workpiece that you will be sawing in firmly
into place.
2. Remove any wood residue that is near the saw or
stuck to the surface of the saw; do not use your hand
for this. Switch the appliance off before removing any
residue!
3. Always switch the jigsaw on in idle, i.e. switch the saw
on before bringing it into contact with the workpiece.
4. When sawing the wood watch out for knots, nails,
Voltage
| 230 V~
Frequency
| 50 Hz
Input power
| 350 W
Speed, no load
| 3000/min
Max. material thicknes
| 55 mm
Max. cutting stroke
| 16 mm
Cutting angle
| 0 - 45°
Machine weight
| 2 kg
Lpa Sound pressure level
| 81.3 dB(A)
Lwa Sound power level
| 94.3 dB(A)
Vibration
| 4.3 m/s
2
UK
English
Push
3