PRONAR RC2100-2, Руководство оператора

Страница: 73 / 121

SECTION 4 Pronar RC2100-2
4.15
Spring catches (1) Figure (4.4) are mounted near the ramp rotation pin. Pull out the lever to
position (2) in order to release the catch. In this position, the catch lever can not be
automatically closed. After releasing the interlock, the ramps can be lowered to working
position.
After finishing work and folding the ramps, check whether the spring catches have
automatically returned to locking position. Otherwise, set the levers to correct position -
position (1) – Figure (4.4).
ATTENTION
After finishing ramps folding, make sure that spring catches are in ramp locking position.
FIGURE 4.4 Spring catch
(1) catch lever in ramp locking position, (2) catch lever in ramp releasing position