PRONAR RC2100-2, Руководство оператора, Страница: 29 / 121

SECTION 2 Pronar RC2100-2
2.5
•
The trailer is not intended for transporting people, animals or hazardous
materials, to which separate regulations apply.
•
The load must be arranged in such a way that it does not threaten the stability of
the trailer and does not hinder driving.
•
The arrangement of the load may not cause an overload on the axle or hitch
system of the trailer or tractor.
•
Do NOT climb on the load platform during loading. Secure the load only when the
machine rests on the load platform planks. If the load requires backing (e.g. in
order to position the machine properly), ensure that the backing is properly
secured against relocation.
•
Oversize load may be transported on public roads only if a travel permit is
obtained from a competent office.
•
Loading equipment may work on the load platform only if the total weight of the
loading equipment and the load does not exceed the maximum carrying capacity
of the trailer.
•
Be especially careful when opening or closing the ramps because there is a risk
of crushing.
•
Unfolded ramps must adhere to level surface.
•
Unfolded ramps must be at the same height.
•
Incorrect load distribution and overloading the machine may cause the trailer to
tip over or cause damage to its components.
•
Unloading and loading of trailer may only take place when the machine is
positioned on level and hard surface and connected to tractor. Tractor and trailer
must be placed to drive forwards.
•
Ensure that there are no bystanders in the unloading or loading zone. Before
unfolding the ramps, guarantee proper visibility and make certain that there are
no bystanders near the trailer.
•
During loading and unloading the trailer the drawbar eye and the tractor hitch are
subjected to great vertical loading.