Pronar RC2100-2
SECTION 2
2.4
2.1.3 HYDRAULIC SYSTEM
•
The hydraulic system is under high pressure when operating.
•
Regularly check the technical condition of the hydraulic connections and conduits.
There must be no oil leaks.
•
In the event of the hydraulic system malfunction, discontinue using the trailer until
the malfunction is corrected.
•
When connecting the hydraulic conduits to the tractor, make sure that the
hydraulic system of the tractor and the hydraulic system of the trailer are not
under pressure. If necessary, reduce residual pressure in the system.
•
In the event of injuries being caused by pressurised hydraulic oil, contact a doctor
immediately. Hydraulic oil may penetrate the skin and cause infections. In the
event of contact of oil with eyes, rinse eyes with a large quantity of water and in
the event of the occurrence of irritation consult a doctor. In the event of contact of
oil with skin wash the area of contact with water and soap. Do NOT apply organic
solvents (petrol, kerosene).
•
Use the hydraulic oil recommended by the Manufacturer.
•
After changing the hydraulic oil, the used oil should be properly disposed of. Used
oil or oil which has lost its properties should be stored in original containers or
replacement containers resistant to action of hydrocarbons. Replacement
containers must be clearly marked and appropriately stored.
•
Do not store hydraulic oil in packaging designed for storing food or foodstuffs.
•
Rubber hydraulic conduits must be replaced every 4 years regardless of their
technical condition.
2.1.4 LOADING AND UNLOADING
•
Loading and unloading work should be carried out by persons experienced in this
type of work.
•
The load must not protrude further out than the load platform's front wall. The load
must be arranged in such a way that it does not threaten the stability of the trailer
and does not hinder driving.
Содержание RC2100-2
