PRONAR RC2100-2, Руководство оператора

Страница: 105 / 121

SECTION 5 Pronar RC2100-2
5.27
TABLE 5.3 Tightening torques for pneumatic system fittings
PART NAME THREAD
Tightening torque
(NM)
M12x1.5 24
M14x1.5 30
M16x1.5 35
M18x1.5 36
Pneumatic system fittings
M22x1.5 40
5.5 CHECKING DRAWBAR EYE TIGHTNESS
Drawbar eye tightness should be checked simultaneously with wheel nut tightness checking.
Drawbar eye retaining bolts (M20X80 DIN127) should be tightened diagonally using a torque
spanner with torque of 100Nm and then retightened using torque of 396Nm.
Bolts and nuts should be in good technical condition. Corroded parts or those with damaged
threads should be replaced.
Checking drawbar eye tightness:
•
after first use,
•
after first travel with load,
•
after 6 months of trailer use.
In the event of intensive use, drawbar eye tightness should be checked at least every 100
kilometres.