PRONAR RC2100-2, Руководство оператора

Страница: 116 / 121

Pronar RC2100-2 SECTION 5
5.38
time the machine must be unloaded. Trailer should be very carefully washed and
dried.
•
Corroded places should be cleaned of rust, degreased and protected using
undercoat paint and then painted with surface paint according to colour scheme.
•
In the event of a prolonged work stoppage, it is essential to lubricate all
components regardless of the date of the last lubrication.
•
Wheel rims and tyres should be carefully washed and dried. During longer
storage of unused trailer it is recommended that every 2 to 3 weeks the machine
may be moved a bit so that the place of contact of tyres with ground is changed.
The tyres will not be deformed and maintain proper geometry. Also, air pressure
in tyres should be inspected from time to time and, if necessary, pressure should
be increased to appropriate value.
5.11 TIGHTENING TORQUE FOR NUT AND BOLT
CONNECTIONS
Unless other tightening parameters are given, during maintenance repair work apply
appropriate torque to tighten nut and bolt connections. Recommended tightening torque for
the most frequently used nut and bolt connections are given in table below. Given values
apply to non-lubricated steel bolts.
TABLE 5.8 Tightening torque for nut and bolt connections
5.8
(1)
8.8
(1)
10.9
(1)
METRIC
THREAD
Md [Nm]
M10 37 49 72
M12 64 85 125
M14 100 135 200
M16 160 210 310
M20 300 425 610
M24 530 730 1,050