PRONAR RC2100-2 Скачать руководство пользователя страница 106

Страница: 106 / 121

Pronar RC2100-2

SECTION 5

5.28

5.6

MAINTENANCE OF ELECTRICAL SYSTEM AND WARNING

ELEMENTS

5.6.1 PRELIMINARY INFORMATION

Work connected with the repair, change or regeneration of electrical system components

should be entrusted to specialist establishments, having the appropriate technology and

qualifications for this type of work.

ATTENTION

Do NOT travel with out of order lighting system. Damaged lamp lenses, and burned-out
bulbs must be replaced immediately before travelling. Lost or damaged reflectors must be
replaced.

The responsibilities of the user are limited to:

•

technical inspection of electrical system and reflectors,

•

changing bulbs

Scope of maintenance activities

Connect trailer to tractor with appropriate connection lead.

Check if the connection lead is reliable. Check connection sockets in

tractor and trailer.

Check completeness and technical condition of trailer lights.

Check completeness of all reflectors.

Check correct mounting of the slow-moving vehicle warning sign holder.

Before driving on to public road, check that the tractor is equipped with a

warning reflective triangle.

Checking technical condition of electrical system:

•

each time while connecting the trailer.

Содержание RC2100-2


























































































































Результаты поиска

Содержание RC2100-2

Отзывы:

Похожие инструкции для RC2100-2

Бренды по названию

Популярные бренды

PRONAR RC2100-2, Руководство оператора

Результаты поиска

Содержание RC2100-2

Отзывы:

Похожие инструкции для RC2100-2

Бренды по названию

Популярные бренды