PRONAR RC2100-2, Руководство оператора

Страница: 113 / 121

SECTION 5 Pronar RC2100-2
5.35
TABLE 5.7 L-HL 32 Lotos hydraulic oil characteristics
ITEM NAME UNIT VALUE
1 ISO 3448VG viscosity classification - 32
2
Kinematic viscosity at 40°C mm
2
/s 28.8 – 35.2
3 ISO 6743/99 quality classification - HL
4 DIN 51502 quality classification - HL
5 Flash-point ˚C 230
Because of its composition, the oil is not classified as a dangerous substance, however long-
term action on the skin or eyes may cause irritation. In the event of contact of oil with skin
wash the place of contact with water and soap. Do NOT apply organic solvents (petrol,
kerosene). Contaminated clothing should be changed to prevent access of oil to skin. In the
event of contact of oil with eye, rinse with large quantity of water and in the event of the
occurrence of irritation consult a doctor. Hydraulic oil in normal conditions is not harmful to
the respiratory tract. A hazard only occurs when oil is strongly atomised (oil vapour), or in the
case of fire during which toxic compounds may be released. Oil fires should be quenched
with the use of carbon dioxide, foam or steam extinguishers. Do not use water to quench oil
fires.
5.8.2 LUBRICANTS
For heavily loaded parts it is recommended to apply lithium greases with addition of
molybdenum disulphide (MOS
2
) or graphite. In the case of less loaded sub-assemblies the
application of general purpose machine greases is recommended, which contain
anticorrosion additives and have significant resistance to being washed away by water.
Aerosol preparations (silicon greases and anticorrosive-lubricating substances) should have
similar characteristics.
Before using the greases, read the information leaflet for a given product. Particularly
relevant are safety rules and handling procedures for a given lubricant as well as waste
disposal procedure (used containers, contaminated rags etc.). Information leaflet (material
safety data sheet) should be kept together with grease.