PRONAR RC2100-2, Руководство оператора, Страница: 30 / 121

Pronar RC2100-2 SECTION 2
2.6
•
After completion of loading, make certain that no tools remain on the load
platform.
•
Ends of load fixing belts, chains or ropes should be secured in such a manner as
to ensure that they do not fall down onto road surface and do not become tangled
with moving elements of the trailer (wheels – brake drums, hydraulic cylinders
etc.).
2.1.5 TRANSPORTING THE MACHINE
•
During travel on public roads comply with the road traffic regulations and transport
regulations in force in a given country, in which the trailer is used.
•
Do not exceed the permitted speed arising from road conditions and design
limitations. Adjust travel speed to the prevailing road conditions, trailer load and
road traffic regulations limits.
•
The machine must NOT be left unsecured. When not connected to the tractor, the
trailer must be immobilised with parking brake and protected against rolling with
chocks or other objects without sharp edges placed under the front and back
trailer wheels.
•
Before driving off check that the parking brake is released. The trailer's ramps
must be folded and properly secured using ramps' interlocks.
•
Travelling with ramps which are unfolded and not secured with ramps' interlocks
is prohibited. Before moving off make sure that the support is properly placed in
transport position and secured.
•
Before moving check that the trailer is correctly hitched to the tractor (in particular
check security of hitching pin).
•
The trailer with unfolded load platform width extensions may travel on public
roads only if a permit to move oversize load is obtained from a competent office in
a given country and the requirements concerning travel conditions specified in the
road traffic regulations are adhered to. Otherwise, such trailer must not travel on
public roads.
•
Before using the trailer always check its technical condition, especially in terms of
safety. In particular, check the technical condition of the hitch system, the axle