12
2
Carefully mark four drill hole locations as indicated below,
based on your Webster LT whiteboard model.
3
Drill the holes as marked, using an 11/32
"
or 3/8
"
(9 mm or
9.5
mm) drill bit.
4
Insert the wall anchors into the holes and tap them into place
flush with the wall.
5
Insert the screws into the wall anchors and tighten them firmly,
taking care not to let the wall anchors turn in the wall while
tightening the screws. Remove the screws prior to the next step
and discard the black washers used to help tighten the screws.
Model
Distance from the
floor to the top
holes
Horizontal distance
between holes
Vertical distance
between holes
LT 4000
76"
(1930 mm)
49 5/16"
(1252 mm)
31 15/16"
(811 mm)
LT 5000
80"
(2025 mm)
56 1/2"
(1435 mm)
37 3/8"
(949 mm)
LT 6000
80"
(2025 mm)
65 5/16"
(1660 mm)
43 13/16"
(1112 mm)
80"
(2025 mm)
65 5/16"
(1660 mm)
LT 6000
31 15/16" (811 mm)
56 1/2"
(1435 mm)
LT 5000
LT 4000
49 5/16"
(1252 mm)
37 3/8" (949 mm)
43 13/16" (1112 mm)
76"
(1930 mm)
80"
(2025 mm)
Webster_draft2.book.mif Page 12 Friday, October 11, 2002 10:07 AM
