99
Care and Maintenance
Caring for the TS Whiteboard
Your Webster TS whiteboard can have one of two possible surfaces.
The appropriate care of each surface is very different. To determine
which Webster TS whiteboard surface you have, find the serial
number located on the underside of the whiteboard tray next to the
power connection.
Use the care instructions below if your board’s serial number begins
with “A” or “B”:
•
Wipe the whiteboard with a clean, soft, dry cloth or a duster.
•
Clean whiteboard parts with a cloth dampened with mild soap
and water. Stubborn stains can be removed using isopropyl
alcohol.
•
Do not use spray cleaners (such as whiteboard cleaner). Spray
cleaners will damage the board.
•
Do not use abrasive cleaners or cloths.
Use the care instructions below if your board’s serial number begins
with any other letter:
•
For daily cleaning or as needed, rinse surfaces with water using
a soft cloth or sponge. Dry with a soft cloth prior to writing.
•
Remove any remaining marks with Sanford Expo Towelettes or
equivalent. Whiteboard cleaners available at office supply
stores can also be used. Rinse with water and dry with a soft
cloth.
•
For stubborn stains, you can use a paint/stain remover such as
Goof Off
®
. After the stain has been removed, rinse with clean
water and dry with a soft cloth.
For all Webster TS whiteboards:
•
Use only the dry-erase markers and erasers recommended by
PolyVision. To order markers, call 1-800-344-4922 in the USA or
+32 (0)89 32 31 30 in Europe.
•
Change erasers when they become dirty to leave less ink resi-
due on your board. Replacement erasers are available directly
Webster_draft2.book.mif Page 99 Friday, October 11, 2002 10:07 AM
