6
Mounting Your Webster TS Whiteboard on a Wall
You will need a tape measure, Phillips screwdriver, and drill.
To mount the Webster TS whiteboard on a wall:
1
Choose a location with convenient access to your computer, an
AC power outlet, and any network connections or projectors you
are using.
2
Carefully mark two drill hole locations as indicated below, based
on your Webster TS whiteboard model:
3
Using the mounting plates as a template, mark two additional
drill hole locations that are 3/4
"
(19 mm) from the original hole.
4
For sheet rock walls, screw the self-tapping sheet rock anchors
into the wall using a power driver, if available. Wall anchors for
Model
Distance from the
floor to the holes
Distance between
hole locations
TS 400
74"
(1880 mm)
42"
(1070 mm)
TS 600
77”
(1950 mm)
62"
(1575 mm)
TS 800
77"
(1950 mm)
92"
(2335 mm)
92"
(2335 mm)
77" (1950 mm)
77" (1950 mm)
62"
(1575 mm)
42"
(1070 mm)
74" (1880 mm)
TS 800
TS 600
TS 400
Webster_draft2.book.mif Page 6 Friday, October 11, 2002 10:07 AM
