Recharge the Remote Control Battery
When the remote control battery power is at 10% or less, a notification displays on the RealPresence
Group system Home screen.
You can use a USB 2.0 port on the system to charge the remote control battery. The RealPresence
Group 300, 310, and 500 systems have two USB 2.0 ports on the back of each system, while the
RealPresence Group 700 system has one USB 2.0 port on the front of the system and two USB 3.0 ports
on the back of the system.
Procedure
1.
Pull the battery out of the end of the remote control.
2.
Insert the USB plug of the battery into a USB 2.0 port on your system.
3.
Wait until the status light on the battery turns green before removing it from the port.
Recharging the battery can take from 20 minutes up to multiple hours.
4.
Insert the charged battery into the remote control.
Recharge the Battery: RealPresence Group 300, 310, 500 and 700 Systems
Wake a RealPresence Group Series System
After a certain amount of time with no activity, the RealPresence Group Series system goes into sleep
mode.
Procedure
»
Press any button on the remote control, or just pick up the remote to wake up the system.
Contacts
The directory on your system stores contact information that you can use to quickly call contacts. Any
contacts that you add to the directory are accessible to everyone at your site who uses the system. Users
at other sites cannot access the contacts on your system.
When a contact is listed in the directory of your system, the system displays the name on the screen
when receiving an incoming call. If a contact that is not listed in the directory calls, the dialing information
for that contact displays, and you can choose to save the information in the directory when the call ends.
Using a Polycom RealPresence Group Series Remote Control
Polycom, Inc.
13
