Control with HDMI function
08
68
En
HDMI Setup
You must adjust the settings of this
r
eceive
r
as well as the
connected
Control
with HDMI-compatible components
in o
r
de
r
to make use of the
Control
with HDMI function.
Fo
r
mo
r
e info
r
mation see the ope
r
ating inst
r
uctions fo
r
each component.
1
Set the remote control to the receiver operation
mode, then press HOME MENU.
2
Select ‘System Setup’, then press ENTER.
3
Select ‘Other Setup’, then press ENTER.
4
Select ‘HDMI Setup’, then press ENTER.
5
Select the ‘Control’ setting you want.
Choose whethe
r
to set this unit’s
Control
with HDMI
function
ON
o
r
OFF
. You will need to set it to
ON
to use
the
Control
with HDMI function.
When using a component that does not suppo
r
t the
Control
with HDMI function, set this to
OFF
.
•
ON
– Enables the
Control
with HDMI function. When
this unit’s powe
r
is tu
r
ned off and you have a
suppo
r
ted sou
r
ce begin playback while using the
Control
with HDMI function, the audio and video
outputs f
r
om the HDMI connection a
r
e output f
r
om
the TV.
•
OFF
– The
Control
with HDMI is disabled.
Synch
r
onized ope
r
ations cannot be used. When this
unit’s powe
r
is tu
r
ned off, audio and video of sou
r
ces
connected via HDMI a
r
e not output.
6
Select the ‘Control Mode’ setting you want.
Choose whethe
r
you want to enable HDMI fo
r
all linked
functions o
r
the PQLS function only. Howeve
r
, Display
Powe
r
Off will activate the settings set fo
r
th in step 7
below.
•
ALL
– Enabled fo
r
all linked functions.
•
PQLS
– Enabled only fo
r
the PQLS function. When
PQLS
is selected, link functions othe
r
than the PQLS
function may not wo
r
k p
r
ope
r
ly. If you wish to use all
link functions, select
ALL
.
7
Select the ‘Display Power Off’ setting you want.
If the TV’s powe
r
is tu
r
ned off while using the
Control
with HDMI function, the
r
eceive
r
’s powe
r
is also tu
r
ned
off (all powe
r
off function). This function can be disabled.
•
YES
– The all powe
r
off function is enabled. The
r
eceive
r
’s powe
r
tu
r
ns off togethe
r
with the TV’s
powe
r
.
This function only wo
r
ks when the input fo
r
a
component connected to the
r
eceive
r
by HDMI
connection is selected o
r
when watching the TV.
•
NO
– The all powe
r
off function is disabled. The
r
eceive
r
’s powe
r
is not affected when the TV’s powe
r
is tu
r
ned off.
8
Select the ‘Standby Through’ setting you want.
It is possible to t
r
ansfe
r
signals f
r
om an HDMI-connected
playe
r
to the TV when this
r
eceive
r
's powe
r
is on standby
as long as
Control
is
ON
, but the amount of ene
r
gy
consumed
r
ises. It is, howeve
r
, possible to minimize
ene
r
gy consumption when powe
r
is set to standby.
•
Normal
– Regula
r
setting. Powe
r
-up time f
r
om
standby is sho
r
t.
•
Eco
– Conse
r
ves ene
r
gy while standby. Powe
r
-up
time is longe
r
than when set to
Normal
.
9
Select the ‘TV Audio’ setting you want.
When a TV suppo
r
ting the HDMI Audio Retu
r
n Channel
function is connected to the
r
eceive
r
, the sound of the TV
can be input via the HDMI te
r
minal.
•
Normal
– The TV’s sound is input f
r
om the Audio
input te
r
minals othe
r
than HDMI inputs.
•
via HDMI
– The TV’s sound is input via the HDMI
te
r
minal. This can only be selected when
Control
is
set to
ON
.
10 Select the ‘12V Trigger’ setting you want.
The component connected to the
12V TRIGGER
jack can
be tu
r
ned on and off when
HDMI OUT
is switched.
HDMI
OUT 1
,
HDMI OUT 2
o
r
OFF
can be selected. Select
OFF
when you want the component to switch when the input
function is switched.
11 When you’re finished, press HOME MENU.
Before using synchronization
Once you have finished all connections and settings, you
must:
1
Put all components into standby mode.
2
Turn the power on for all components, with the
power for the TV being turned on last.
3
Choose the HDMI input to which the TV is
connected to this receiver, and see if video output from
connected components displays properly on the screen
or not.
4
Check whether the components connected to all
HDMI inputs are properly displayed.
SC-LX83_73_DLPW.book 68 ページ ２０１０年５月１９日 水曜日 午後２時７分
