Pioneer SC-LX73, Руководство по эксплуатации

Страница: 112 / 144

The System Setup and Other Setup menus 12
112
En
X-Curve
Most soundt r acks mixed fo r cinema sound too b r ight
when played back in la r ge r ooms. The X-Cu r ve setting acts
as a kind of r e-equalization fo r home theate r listening, and
r esto r es p r ope r tonal balance of movie soundt r acks.
1
1 Select ‘X-Curve’ from the Manual SP Setup menu.
2 Choose the X-Curve setting you want.
Use
/
to adjust the setting. The X-Cu r ve is exp r essed
as a downwa r ds slope in decibels pe r octave, sta r ting at
2 kHz. The sound becomes less b r ight as the slope
inc r eases (to a maximum of –3.0dB/oct ). Use the
following guidelines to set the X-Cu r ve acco r ding to you r
r oom size:
• If you select OFF , the f r equency cu r ve will be flat and
the X-Cu r ve has no effect.
3 When you’re finished, press RETURN.
THX Audio Setting
This menu allows the use r to adjust va r ious THX featu r es
including Loudness Plus, SBch p r ocessing, SB Speake r
Position, THX Ult r a2/Select2
2
Subwoofe r (on/off), and
Bounda r y Gain Cont r ol. Please see page 129 fo r details
r ega r ding these THX featu r es.
1 Select ‘THX Audio Setting’ from the Manual SP
setup menu.
2 Select either ON or OFF for the THX Loudness Plus
setting.
3 Specify whether the SBch processing is AUTO or
MANUAL.
•
AUTO
– When su rr ound back speake r s a r e connected,
whethe r o r not su rr ound back channel signals a r e
p r esent in the audio signals being input is detected
and the app r op r iate THX su rr ound mode is set.
• MANUAL – The desi r ed THX su rr ound mode can be
selected r ega r dless of whethe r o r not su rr ound back
channel signals a r e p r esent in the audio signals
being input.
4 Specify the distance of your surround back speakers
from each other.
• 0–0.3 m – Su rr ound back speake r s within 30 cm
apa r t (best fo r THX su rr ound sound).
•
>0.3– 1.2 m
– Su rr ound back speake r s between 30
cm and 1.2 m apa r t.
• 1.2 m< – Su rr ound back speake r s mo r e than 1.2 m
apa r t (default).
5 Specify whether your subwoofer is Ultra2/Select2
2
certified or not.
If you r subwoofe r isn’t THX Ult r a2/Select2
2
ce r tified, but
you still want to switch bounda r y gain compensation on,
select
YES
he r e, but the effect might not wo r k p r ope r ly.
6 Select either ON or OFF for Boundary Gain
Compensation setting.
7 When you’re finished, press RETURN.
You will r etu r n to the
Manual SP Setup
menu.
Network Setup menu
Setting up the netwo r k to listen to Inte r net r adio on this
r eceive r .
1 Set the remote control to the receiver operation
mode, then press HOME MENU.
A G r aphical Use r Inte r face (GUI) sc r een appea r s on you r
TV. Use
///
and ENTER to navigate th r ough the
sc r eens and select menu items. P r ess RETURN to
confi r m and exit the cu rr ent menu.
2 Select ‘System Setup’ from the Home Menu.
3 Select ‘Network Setup’ from the System Setup
menu.
4 Select the setting you want to adjust.
If you a r e doing this fo r the fi r st time, you may want to
adjust these settings in o r de r :
• IP Address, Proxy – Sets up the IP add r ess/P r oxy of
this r eceive r (page 113).
• Information – Checks the MAC add r ess and the
fi r mwa r e ve r sion of the Netwo r k section of this
r eceive r (page 113).
• Network Standby – Allows the Web Cont r ol
function to be used even when the r eceive r is in the
standby mode (page 113).
Note
1 Since the p r incipal is the same, X-Cu r ve isn’t applied when you’ r e using any of the Home THX, Pu r e di r ect o r Optimum su rr ound modes.
Room size (m
2
)
≤
36
≤
48
≤
60
≤
72
≤
300
≤
1000
X-Curve
(dB/oct)
–0.5 –1.0 –1.5 –2.0 –2.5 –3.0
2 Ult r a2 fo r the SC-LX83, Select2 fo r the SC-LX73.
SC-LX83_73_DLPW.book 112 ページ ２０１０年５月１９日 水曜日 午後２時７分