Pioneer SC-LX73, Руководство по эксплуатации

Страница: 58 / 144

Listening to your system 06
58
En
Using Stream Direct
Use the St r eam Di r ect modes when you want to hea r the
t r uest possible r ep r oduction of a sou r ce. All unnecessa r y
signal p r ocessing is bypassed, and you’ r e left with the
pu r e analog o r digital sound sou r ce. P r ocessing diffe r s
depending on the input signal and whethe r o r not
su rr ound back speake r s a r e connected. Fo r details, see
Auto Surround, ALC and Stream Direct with different input
signal formats
on page 132.
1 Set the remote control to the receiver operation
mode.
2 While listening to a source, press AUTO/ALC/
DIRECT (AUTO SURR/ALC/STREAM DIRECT) to select
the mode you want.
Check the digital fo r mat indicato r s in the f r ont panel
display to see how the sou r ce is being p r ocessed.
• AUTO SURROUND – See Auto playback on page 55.
• ALC – Listening in Auto level cont r ol mode (page 55).
•
DIRECT
– Plays back sound f r om the sou r ce with the
least modification next to
PURE DIRECT
. With
DIRECT
, the only modifications added to
PURE
DIRECT
playback a r e calib r ation of the sound field by
the MCACC system and the Phase Cont r ol effect.
• PURE DIRECT – Plays back unmodified sound f r om
sou r ce with only minimal digital t r eatment. No sound
is output f r om the Speake r B in this mode.
• OPTIMUM SURR (SC-LX83 only) – Listening in
Optimum Su rr ound mode (page 55).
Selecting MCACC presets
• Default setting: MEMORY 1
If you have calib r ated you r system fo r diffe r ent listening
positions, you can switch between settings to suit the
kind of sou
r ce you’ r e listening to and whe r e you’ r e sitting
(fo r example, watching movies f r om a sofa, o r playing a
video game close to the TV).
1 Set the remote control to the receiver operation
mode.
2 While listening to a source, press MCACC.
P r ess r epeatedly to select one of the six MCACC p r esets
1
.
See
Data Management
on page 107 to check and
manage you r cu rr ent settings.
Choosing the input signal
On this r eceive r , it is possible to switch the input signals
fo r the diffe r ent inputs as desc r ibed below.
2
1 Set the remote control to the receiver operation
mode.
2 Press SIGNAL SEL to select the input signal
corresponding to the source component.
Each p r ess cycles th r ough the options as follows:
•
AUTO
– The r eceive r selects the fi r st available signal
in the following o r de r :
HDMI
;
DIGITAL
;
ANALOG
.
•
ANALOG
– Selects an analog signal.
• DIGITAL – Selects an optical o r coaxial digital signal.
• HDMI – Selects an HDMI signal.
3
•
PCM
– Fo r PCM input signals.
4
The r eceive r selects
the fi r st available signal in the following o r de r :
HDMI
;
DIGITAL
.
When set to
DIGITAL
,
HDMI
o r
AUTO
(only selected
DIGITAL o r HDMI ), the indicato r s light acco r ding to the
signal being decoded (see Display on page 15).
Better sound using Phase Control
This r eceive r ’s Phase Cont r ol featu r e uses phase
co rr ection measu r es to make su r e you r sound sou r ce
a rr ives at the listening position in phase, p r eventing
unwanted disto r tion and/o r colo r ing of the sound.
Note
1 • These settings have no effect when headphones a r e connected.
• You can also p r ess
/
to select the MCACC p r eset.
2 • This r eceive r can only play back Dolby Digital, PCM (32 kHz to 192 kHz), DTS (including DTS 96/24) and WMA9 P r o digital signal fo r mats.
The compatible signals via the HDMI te r minals a r e: Dolby Digital, DTS, WMA9 P r o, PCM (32 kHz to 192 kHz), Dolby T r ueHD, Dolby Digital Plus,
DTS-EXPRESS, DTS-HD Maste r Audio and SACD.
• You may get digital noise when an LD, CD, DVD o r BD playe r compatible with DTS is playing an analog signal. To p r event noise, make the
p r ope r digital connections (page 33) and set the signal input to
DIGITAL
.
• Some DVD playe r s don’t output DTS signals. Fo r mo r e details, r efe r to the inst r uction manual supplied with you r DVD playe r .
3 When the
HDMI
audio output pa r amete r is set to
THROUGH
, the sound will be hea r d th r ough you r TV, not f r om this r eceive r .
4 • This is useful if you find the r e is a slight delay befo r e
AUTO
r ecognizes the PCM signal on a CD, fo r instance.
• When
PCM
is selected, noise may be output du r ing playback of non-PCM sou r ces. Please select anothe r input signal if this is a p r oblem.
SC-LX83_73_DLPW.book 58 ページ ２０１０年５月１９日 水曜日 午後２時７分