Pima WRN, Руководство по установке

Страница: 1 / 8

-1-
WRN
Installation Instructions
Инструкция по установке
Instrucciones de Instalación
הנקתה תוארוה
English, Русский, Español,
תירבע
1 Mounting Holes
2 Tamper switch
3 Bus Terminals
4 Bus Cable
5 Hunter-Pro Control Panel
6 Hunter-Pro KEYPAD Terminals 1 Монтажные отверстия
2 Тампер
3 Клеммная колодка BUS расширителя
4 4-х проводной кабель шины BUS
5 Контрольная панель Hunter-Pro
6 Клеммные контакты "KEYPAD"
панели Hunter-Pro
1 Orificios de montaje
2 Interruptor contra sabotaje (Tamper)
3 Terminales de conexión al Bus
4 Cable de conexión al Bus
5 Panel de Control Hunter-Pro
6 Terminales de conexión KEYPAD en el
Hunter-Pro
1 הילת ירוח
2 רפמט קספמ
3 ירוביח Bus
4 ה יטוח תמצ - Bus
5 לש הרקבה חול Hunter-Pro
6 ירוביח KEYPAD ב - Hunter-Pro
WRN Wireless Receiver
The WRN is a FastLink technology wireless receiver that allows adding wireless capabilities to the Hunter-Pro Series intruder alarm
systems. The FastLink communication is encrypted using true, 128-bit AES encryption for high level of security.
The WRN can transfer signals from Visonic’s
1 detectors and other peripherals (but not remote controls and sirens), and PIMA’s RMC
remote control to the control panel, over the bus.
The WRN can alert on jamming, and has a back tamper switch.
For enrollment information, see the Hunter-Pro’s Installation guide (P/N: 4410281).
Technical specifications

Frequency (MHz):
o
WRN143: 433.92
o
WRN187: 868.95
 Wireless Zones/Key fobs Support:
o
Zones: 32, Key fobs: 24
 Current Consumption: 60mA

Operating Input Voltage: 9-15VDC

Dimensions: 15 X 12 X 3 cm
 Weight: 200gr
 CE Compliance
 Operating Temperature: -10 to +50 °C
 Humidity (Max.): 93% R.H., Non-condensing.
Content of the product package
 WRN Re Bus connector  This guide
Mounting guidelines
 Mount the WRN where the wireless signal is high, and it can be connected to the bus.
 Do not mount the receiver inside a metal enclosure or on metalized wallpaper.
 Mount the receiver at least 2 meters away from any electrical device that generates noise.
 The receiver must not be exposed to direct heat sources, direct sunlight or strong artificial light.
 Contact with spraying or dripping water and aggressive liquids must be avoided.
1 www.visonic.com
1 Fo
rc
e
B
u
s
2
3
4
5
6
4
WRN
1
2
3