manualshive.com logo in svg

PI E-871.1A1N, Руководство пользователя, Страница: 119 / 226

Поделиться
Скачать
PI E-871.1A1N Скачать руководство пользователя страница 119

#8 Query If Macro Is Running

Used in: (95)

Description:

Tests if a macro is running on the controller.

Format:

#8

#8 corresponds to the BS control character in ISO/IEC 6429.

Response:

<MacroRunning>

<MacroRunning>

Macro is running (UINT)

<MacroRunning>

Description

1

A macro is running.

0

No macro is running.

#24 Stop All Axes

Used in: (96), Triggering Motion (32)

Description:

Stops all axes abruptly.

Long description

Stops all motion started by motion commands (e.g., 

MOV (p. 149)

,

MVR (p. 150)

, MVE, 

STE (p. 162)

, 

SMO (p. 158)

), reference point defi-

nition commands (FNL, FPL, 

FRF (p. 132)

), and macros.

Also stops the macro.
Sets the error code to 10.
After the axes are stopped, their target positions are set to their cur-
rent positions.
The function of this command is identical to 

STP (p. 162)

 except on-

ly one character is sent via the interface. Therefore, #24 can also be
used when the controller is doing time-consuming tasks.

Format:

#24

#24 corresponds to the CAN control character in ISO/IEC 6429.

*IDN? Get Device Identification

Used in: (24)

Description:

Queries the device identification string.

Format:

*IDN?

Response:

<DeviceInformation>

␊

<DeviceInformation>

Device identification string with controller
name, serial number, and firmware version.
(STRING)

9  COMMAND REFERENCE

PZ285EN 

‒

 1/30/2019

119

M O T I O N   |   P O S I T I O N I N G

Содержание E-871.1A1N



































































































































































































































Отзывы:

Нет отзывов