manualshive.com logo in svg

PI E-871.1A1N, Руководство пользователя, Страница: 51 / 226

Поделиться
Скачать
PI E-871.1A1N Скачать руководство пользователя страница 51

Updating the PC software in Linux

1. Open the website 

www.pi.ws

.

2. Log onto the website:

a) Click 

Login

.

b) Log in with the user name and password for the E-871.1A1N.

3. Search for the product:

a) Click 

Search

.

b) Enter the product number up to the period (e.g., E-871) or the product family (e.g.,

PICMA® bender) into the search field.

c) Click 

Start search

 or press the Enter key.

d) If necessary: Click 

Load more results

 at the bottom of the list.

4. Click the corresponding product in the list of search results.
5. Scroll down to the 

Downloads

 section on the product detail page.

➔

The software files are shown under 

Software Downloads

.

6. Click the "CD Mirror" archive file and save it.
7. Unpack the archive file into a separate installation directory.
8. Go to the "linux" subdirectory in the directory with the unpacked files.
9. Unpack the archive file in the 

linux

 directory.

10.Read the accompanying information on the software update (readme file and/or

"<Releasenews>" file) and decide whether the update makes sense for your application.

■

If no: Stop the update procedure.

■

If yes: Go through the following steps.

11. Log into the PC as superuser (root privileges).
12.Install the update.
13.If you also received an updated PISTAGES3.DB database from our customer service

department: Install that update onto the PC.

6.6

Connecting the PC

For details on the interface parameters and their default settings, see "

Communication

Interfaces (p. 15)

".

Information

The communication interfaces are active at the same time. Commands are executed in the
order in which the complete command lines arrive. However, simultaneous use of several
communication interfaces can cause problems with the PC software.

►

Always only use one interface of the E-871.1A1N.

6.6.1

Connecting the E-871.1A1N to a PC

Tools and Accessories

■

Suitable cable (e.g., USB cable, included in the 

scope of delivery (p. 14)

)

Requirements

✓

The PC has a connection available for the selected communication interface.

✓

If necessary: The 

interface parameters of the PC have been adapted for the

E-871.1A1N (p. 15)

.

6  INSTALLATION

PZ285EN 

‒

 1/30/2019

51

M O T I O N   |   P O S I T I O N I N G

Содержание E-871.1A1N



































































































































































































































Отзывы:

Нет отзывов