Parata Systems AccuCount II, Руководство пользователя

Страница: 101 / 150

120-0313 Rev 04 4–47
Chapter 4 – Customization
Each of the 15 positions in Statistics - Protocol - Result may be assigned one of the
options shown in Table 4-31.
Table 4-31: Statistics - Protocol - Result Position option definitions
Option Function
Off Position not used (i.e., no output).
Number of samples Outputs the number of samples that were taken at the time the Print
key was pressed (which might not necessary be Max. n).
Total Outputs the total weight of all statistical samples in the current set.
Mean Outputs the mean value of all statistical samples in the current set.
StdDev Outputs the standard deviation between the samples in the current
set, in grams or in pieces.
StdDev% Outputs the standard deviation between the samples in the current
set, as a percentage.
Max/Min/Diff Outputs the maximum value sampled, the minimum value sampled,
and the difference between the two.
Limits TU/TO Outputs the underweight and overweight tolerances, in grams or in
pieces.
See “Weighing CheckWeigher” on page 4-33 or
see “Piece Counting CheckWeigher” on page 4-38.
TU/TO counter Outputs the number of times that samples registered as underweight
or overweight.
Start Date/Time Outputs the date and time that the statistical sampling began.
End Date/Time Outputs the date and time that the statistical sampling ended.
ID 1|2|3|4|5|6 Outputs the identification alphanumeric value 1, 2, 3, 4, 5, or 6.
See “Identification” on page 4-49.
Linefeed Outputs an empty line.
Underline Outputs a line across the printout.