Parata Systems AccuCount II, Руководство пользователя

Страница: 37 / 150

120-0313 Rev 04 3–1
Chapter
3
Operations
This chapter provides information about using applications and performing other
basic operations on an AccuCount II.
3.1 Powering on the scale
Press the
On/Off
key to power on the AccuCount II.
During the start-up sequence the scale executes a self check routine and, after a few
seconds, resumes the same application that it was running when it was powered off.
The scale is equipped with an Autostandby mode, which can be activated or
deactivated in the Configuration menu. If activated, the scale automatically switches to
Standby mode some time after the last weighing or key operation. The delay before
switching to Standby is defined in the Configuration menu (see “Weighing
parameters” on page 4-12).
Press any button or place a weight on the scale, to switch the scale from Standby mode
back into normal operating mode.
NOTE You should give the scale about thirty minutes to warm up to full operating temperature,
when it is first plugged in.
When you press the
On/Off
key, the scale switches into Standby mode; the scale does
not fully power down unless you unplug it.