Panasonic AJ-HPM200P Скачать руководство пользователя

Страница: 41 / 230

Introduction: Recording, Playback and P2 Card Handling

In
tr

odu

tio

Press the EJECT button to eject the P2 card.

◆

NOTE:

• Removing a P2 card in the thumbnail screen automatically closes

the thumbnail screen.

• Do not remove P2 cards during access or during recognition

directly after insertion (when the P2 card access LED flashes

orange); otherwise the P2 cards may be damaged. If a P2 card by

any chance is removed during access, [E-30] appears on the LCD

monitor and the LCD panel displays the [AUTO OFF] warning. All P2

card access LEDs will flash rapidly in orange. Turn off the power,

and then turn it back on.

• The clips on a P2 card that was removed during access may no

longer be in the right order. Check the clips and perform the

necessary repair operation.

➝

For details, refer to “Repairing Bad Clips” (page 66).

• Removing a P2 card during formatting will in most cases destroy the

formatting. Reformat the card after restarting the PC.

• In LAN mode, P2 cards must be available at all times and can

therefore not be removed. To remove a P2 card, return to the main

mode.

Set the write-protection switch to [PROTECT] to prevent

accidental deletion of data recorded on a P2 card.

◆

NOTE:

• Switching the write-protection switch during recording, playback or

other access operation will not take effect until after these access

operations (playback, recording, etc.) complete.

For the latest information not available in the Operating

Instructions of P2 cards and SD memory cards, visit the P2

support desk at the following Web sites.

For English: http://pro-av.panasonic.net/

OFF

CARD L

OCK

②

①

Preventing Accidental Deletion

For the latest information on P2 cards and
SD memory cards

PROTECT

Write-protection

switch

Содержание AJ-HPM200P







































































































































































































































Результаты поиска

Содержание AJ-HPM200P

Отзывы:

Похожие инструкции для AJ-HPM200P

Бренды по названию

Популярные бренды

Panasonic AJ-HPM200P, Инструкция по эксплуатации

Результаты поиска

Содержание AJ-HPM200P

Отзывы:

Похожие инструкции для AJ-HPM200P

Бренды по названию

Популярные бренды