Panasonic AJ-HPM200P Скачать руководство пользователя страница 8

Страница: 8 / 230

• SDHC Logo is a trademark of SD-3C, LLC.

• “AVCHD” and “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.

• Microsoft

, Windows

and Windows Vista

are registered trademarks or trademarks of Microsoft Corporation of the United

States and/or other countries.

• Microsoft product screen shots reprinted with permission from Microsoft Corporation.

• Adobe

and Reader

are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States

and/or other countries.

• Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own-

ers.

• This product is licensed under the AVC Patent Portfolio License for the personal and non-commercial use of the following

activities of a consumer but no license is granted or implied for any other use.

- Encoding video in compliance with the AVC standard (hereafter referred to as “AVC video”).

- Decoding AVC video that was encoded by a consumer engaged in a personal and non-commercial activity.

- Decoding AVC video that was obtained from a video provider licensed to provide AVC video.

Additional information may be obtained from MPEG LA, LLC (http://www.mpegla.com).

- Using this product to make recordings on SD memory cards for distribution to end users for a commercial purpose requires

a separate license agreement from MPEG-LA. End user refers to a person or organization using content for private purpos-

es.

• Use of DCF Technologies under license from Multi-Format, Inc.

Illustrations in this manual

• Note that illustrations of the unit and menu screens may differ from the ones you actually see.

Page references

• In this manual, references to pages are indicated as: (

➝

page 00).

Terminology

• The term “SD memory card” will be used below as a generic for SD and SDHC memory cards.

• A memory card with the “P2” logo (for example the separately sold AJ-P2C064AG) is referred to as a “P2 card.”

• A hard disk drive (HDD) is referred to as a “hard disk.”

• A continuous video recording created during a single recording is referred to as a “clip.”

• The state when the THUMBNAIL and PLAYLIST buttons are off is referred to as the “Recording/playback mode.” (Refer to

page 34.)

•

How to open the operating instruction manual PDF files

Discontinue installation if the installation screen of the software opens as a result of inserting the CD-ROM. When

[INDEX.pdf] on the CD-ROM is opened, a list of the operating instruction manuals will be displayed. Click on the document

name of the manual to be opened.

• Adobe

Reader

is required to read PDF files.

It can be downloaded from the home page of Adobe Systems.

Содержание AJ-HPM200P







































































































































































































































Результаты поиска

Содержание AJ-HPM200P

Отзывы:

Похожие инструкции для AJ-HPM200P

Бренды по названию

Популярные бренды

Panasonic AJ-HPM200P, Инструкция по эксплуатации

Результаты поиска

Содержание AJ-HPM200P

Отзывы:

Похожие инструкции для AJ-HPM200P

Бренды по названию

Популярные бренды