Panasonic AJ-HPM200P Скачать руководство пользователя

Страница: 144 / 230

144

Connections: Connecting This Unit to a Network

Clips on the FTP server that are no longer necessary can be

deleted in the same way as clips on P2 cards.

➝

Refer to “Deleting Clips” (page 65).

◆

NOTE:

• The FTP server may stop the connection if an FTP thumbnail display

is left open and it will not be possible to delete clips after this. Should

this happen, return to the FTP explorer screen, open the FTP

thumbnail display and delete the clip.

Use the steps below to view metadata of clips on the FTP

server. This function shows the same information in the same

way as the P2 card clip property.

Move the cursor to the target clip in the FTP

thumbnail screen.

It allows you to check detailed clip information in the

screen.

Press the MENU button.

Use the cursor buttons to choose [PROPERTY] -

[CLIP PROPERTY] and press the SET button.

You can also use the PROP (SHIFT + TC PRESET) button.

➝

For details, refer to “Viewing and Revising Clip

Information” (page 67).

◆

NOTE:

• Metadata can be viewed but not revised.

• The FTP server may stop the connection if an FTP thumbnail

display or FTP properties are left open. This will prevent

subsequent thumbnail displays. Should this happen, return to

the FTP explorer screen and open the FTP thumbnail display or

properties again.

Use the steps below to transfer clips on P2 cards or hard disks

to an FTP server or write back clips from the FTP server to P2

cards or hard disks.

Open the thumbnail screen to select a clip to transfer

(turning its frame blue).

Press the MENU button.

Use the cursor buttons to choose [OPERATION] -

[COPY] - [FTP] and press the SET button.

The server screen appears.

Use the cursor buttons when the selected server folder

appears to select the folder the file will be transferred to.

◆

NOTE:

• Folder names using multi-byte characters are not correctly

displayed.

• Pressing the EDIT MODE (SHIFT + VIDEO) button will show the

new folder added to the list of current folders. (regardless of

cursor location).

Numeric characters indicating the date and time are

automatically entered for the name of the new folder. Use the full

keyboard to change it as required.

Note that some characters are not allowed in some FTP servers.

Folders with the same name as an existing folder cannot be

created.

Deleting Clips on the FTP Server

Viewing FTP Server Clip Information

Transferring Clips

Transferring clips to the FTP server (Export
copy)

Содержание AJ-HPM200P







































































































































































































































Результаты поиска

Содержание AJ-HPM200P

Отзывы:

Похожие инструкции для AJ-HPM200P

Бренды по названию

Популярные бренды

Panasonic AJ-HPM200P, Инструкция по эксплуатации

Результаты поиска

Содержание AJ-HPM200P

Отзывы:

Похожие инструкции для AJ-HPM200P

Бренды по названию

Популярные бренды