Panasonic AJ-HPM200E Скачать руководство пользователя страница 54

Страница: 54 / 230

Clip Management: Thumbnail and Clip Management

Use the following procedure for editing thumbnails.

Attach a text memo to video you want to edit.

➝

For details, refer to “Attaching Text Memos” (page 60).

Change thumbnail display to text memo display.

Choose [THUMBNAIL] – [TEXT MEMO CLIPS] on the

menu.

Move to the row below the text memo and move the

cursor to the thumbnail you want to edit.

Press the MENU button.

Use the cursor buttons to choose [OPERATION] –

[EXCH. THUMBNAIL] and press the SET button.

Select [YES] and press the SET button.

The Menu closes and the thumbnail reflects the changes

that have been made.

◆

NOTE:

• The THUMBNAIL field in the clip property display shows the

change in thumbnail location (number of frames from the start).

The number for a normal first thumbnail is 0.

• Playback starts from the beginning of the clip regardless of a

change in thumbnail location.

Open the thumbnail screen.

Use the cross cursor buttons to select the clip where

you want to replace a thumbnail.

Start playback.

➝

For details, refer to “Playing Back Clips” (page 56).

Hold down the ENTRY button and press the TEXT

MEMO button during playback or while displaying a

still picture with JOG/SHTL.

This selects the frame where the buttons were pressed as

a thumbnail.

Press the STOP button to return to the thumbnail

screen.

• The thumbnail is replaced.

• You can also move to the beginning of the clip or allow

the clip to end to return to the thumbnail screen, and the

thumbnail will still be replaced.

◆

NOTE:

• If the ENTRY and TEXT MEMO buttons are pressed several

times, the frame where the two buttons were last pressed is
selected.

• Pressing the ENTRY and the TEXT MEMO buttons

simultaneously places a text memo where the buttons were
pressed. When the number of text memos in a clip reaches 100,

no further thumbnail changes can be made.

• When a thumbnail is being replaced, “UPDATING” appears and

the icon spins in the location of the thumbnail. Do not remove P2

cards at this time.

• Do not remove the P2 card until the thumbnail screen returns. If

the card is removed before this, the thumbnails will not be

replaced.

Thumbnail Editing

Editing thumbnails by adding a text memo

Replacing thumbnails during playback

Содержание AJ-HPM200E







































































































































































































































Результаты поиска

Содержание AJ-HPM200E

Отзывы:

Похожие инструкции для AJ-HPM200E

Бренды по названию

Популярные бренды

Panasonic AJ-HPM200E, Инструкция по эксплуатации

Результаты поиска

Содержание AJ-HPM200E

Отзывы:

Похожие инструкции для AJ-HPM200E

Бренды по названию

Популярные бренды