Panasonic AJ-HPM200E Скачать руководство пользователя

Страница: 156 / 230

156

AVCHD Recording and Playback: Using an Optional AVCHD Board

Clip no.

Indicates the order clips were recorded (up to 1000

clips). The number of clips recorded in a different

format or that for some other reason cannot be played

back are indicated in red. To play back clips indicated

in red, choose [PLAY SETUP] – [PB FORMAT] to adjust

the recording format.

➝

Refer to “Setting playback format (PB FORMAT)”

(page 161).

10)

Clip protect indicator

Indicates that a clip is protected.

11)

Various indicators

Shot mark

Indicates the presence of a shot mark. (

➝

page

61)

AaA

: Resume playback indicator

Indicates clips selected for resume playback.

Index

Indicates that an index has been recorded. The

unit cannot record indexes.

Use the steps below to display thumbnails of the desired clip.

More detailed settings of thumbnail display are also possible.

Press the MODE button to switch to the AVCHD

mode.

➝

Refer to “Switching to AVCHD mode” (page 155).

Press the MENU button.

Select [THUMBNAIL SETUP] and press the SET

button.

Press the up and down (

) cursor buttons to select

an item and press the SET button.

THUMBNAIL MODE:

Select the clip to display.

•

indicates factory default settings.

INDICATOR:

Turns indicators on and off. (The factory default is on.)

Clip protect indicator and resume playback indicator are

displayed also when indicator is set to off.

DATA DISPLAY:

Select the data that should appear in the time display of a

clip.

•

indicates factory default settings.

DATE FORMAT:

Select the order for indicating date and time of recording.

This setting does not affect the date of recording

displayed by the clip property.

The default setting for the AJ-HPM200P is “M-D-Y”, and

for the AJ-HPM200E is “D-M-Y”.

Press the MENU button to return to the thumbnail

screen.

Selecting thumbnail display method
(THUMBNAIL SETUP)

ALL

Shows all clips.

SAME

FORMAT:

Displays the clips in the same playback

format.

MARKER:

Displays clips with shot marks.

INDEX:

Displays clips with indexes.

Time code

UB:

User bit

TIME:

Shooting time

DATE:

Day of shooting

DATE TIME:

Shooting date and time

Y-M-D:

Year/month/day

M-D-Y:

Month/day/year

D-M-Y:

Day/month/year

Содержание AJ-HPM200E







































































































































































































































Результаты поиска

Содержание AJ-HPM200E

Отзывы:

Похожие инструкции для AJ-HPM200E

Бренды по названию

Популярные бренды

Panasonic AJ-HPM200E, Инструкция по эксплуатации

Результаты поиска

Содержание AJ-HPM200E

Отзывы:

Похожие инструкции для AJ-HPM200E

Бренды по названию

Популярные бренды