Panasonic AJ-HPM200E Скачать руководство пользователя

Страница: 15 / 230

Opening and Closing the Top Panel

◆

NOTE:

• Take care to avoid pinching your fingers when opening and closing

the top panel.

• Check that the card lock is set to on before closing the top panel.

Never use force to close it when the lock is not set to on as this will

damage the unit.

Pull out the handle, then pull the top of the lever to-

wards you to release the lock.

Free the bottom of the lever. Then hold the top panel

and raise it to open.

◆

NOTE:

• Do not expose the lever to excessive force.

Make sure the EJECT button is folded downwards.

If not folded, fold the EJECT button to the right and set the

card lock to on.

Close the top panel and engage the bottom of the le-

ver with the receptacle in the lower portion of the pan-

el assembly.

While making sure that the bottom of the lever has

been properly seated, press the top of the lever to-

wards the rear to lock it.

Opening the top panel

②

①

②

①

Closing the top panel

OFF

CARD LOC

②

①

Содержание AJ-HPM200E







































































































































































































































Результаты поиска

Содержание AJ-HPM200E

Отзывы:

Похожие инструкции для AJ-HPM200E

Бренды по названию

Популярные бренды

Panasonic AJ-HPM200E, Инструкция по эксплуатации

Результаты поиска

Содержание AJ-HPM200E

Отзывы:

Похожие инструкции для AJ-HPM200E

Бренды по названию

Популярные бренды