OTC Welbee M350 II, Руководство пользователя

Страница: 70 / 148

M
EMORY
F
UNCTION OF
W
ELDING
C
ONDITIONS
W
ELDING
C
ONDITION
C
HAPTER
6
68
3.
Select "Delete JOB".
4.
Turn the screen operation knob (or parameter adjustment knob), and select the JOB No. to delete.
5.
Press the screen operation knob.
6.
Press the screen operation knob.
7.
Check that "End" is displayed on the left/right digital meters and turn off the power switch.
⇒
The power LED switch lights off. The status returns to normal when the power switch is turned on.
●
Turn the screen operation knob and point the cursor to
Delete JOB.
● Press the screen operation knob.
⇒
"dEL" is displayed when the system transits to the
DELETE mode.
⇒ The JOB No. (registration No.) is displayed on the right
digital meter in a flashing mode, and the LED of JOB lights
up.
• To delete all the registration at the same time, turn the parameter
adjustment knob counterclockwise, to display "ALL" on the right
digital meter.
When "ALL" is selected, the current welding condition set on the
operation panel is also deleted, and the welding parameters
including the internal functions return to the initial values.
⇒ The display "dEL" on the left digital meter starts flashing.
• To cancel the deletion, turn off the power switch.
⇒ The welding condition of the selected JOB No. is deleted,
and "End" is displayed on the left/right digital meters.
&DOLEUDWLRQ0RGH
'HOHWH-2%
3DVVZRUG6HWWLQJ
86(50(18
6(/(&7 (17(5