F
UNCTION
ON
O
PERATION
P
ANEL
W
ELDING
C
ONDITION
C
HAPTER
6
60
)XQFWLRQRQ2SHUDWLRQ3DQHO
This section explains the function of displays and keys arranged on the operation panel.
2SHUDWLRQSDQHO
No.
Name
Function
1
Left digital meter
Displays various information.
•
The welding current is displayed in welding, and the LED of "A" lights up.
•
In each setting, corresponding setting values are displayed, and the LED lit position
automatically switches.
2
Right digital meter
Displays various information.
•
The welding voltage is displayed in welding.
•
In each setting, corresponding setting values are displayed, and the LED lit position
automatically switches.
3
Parameter adjustment knob
Pressing this knob switches the digital meter (left/right) that needs to be set.
Turning this knob changes the value of the selected parameter.
Sets the welding current / wire feeder speed when the left digital meter is selected. Switching
between welding current / wire feeder speed is enabled by pressing the UNIT CHANGE key.
Sets the welding voltage when the right digital meter is selected.
If the knob is turned faster, the amount of change will be 10 times larger.
4
UNIT CHANGE key
Switches between welding current / wire feeder speed when the left digital meter is selected.
When the right digital meter is selected and when the SYNERGIC mode is selected as the welding
voltage adjustment method, pressing this key switches the value displayed on the right digital meter
between “fine adjustment value” and “actual voltage value”. (In the SYNERGIC mode, the welding
voltage appropriate for the welding current is regarded as ±0, based on which the welding voltage is
finely adjusted.)
5
DISPLAY CHANGE key
Switches the welding sequence that need to be set. During the welding, the display can be switched
to display the value set as the welding condition.
6
LCD panel
The LCD panel can be used to display the welding conditions that have been set, change the welding
conditions, and make settings for other various types of menu. (
5.3
-
Power ON and Gas Supply)
7
MENU key
Switches between the welding condition setting screens and the MENU screen.
8
CANCEL key
Cancels the operation of various settings and returns to the previous settings.
15
8
7
6
5
4
1
2
3
16
17
5
14
13
12
11
10
9
18
UNIT CHANGE key
DISPLAY CHANGE key
Screen operation knob
Parameter adjusting knob
Содержание Welbee M350 II
