OTC Welbee M350 II, Руководство пользователя

Страница: 119 / 148

117
Chapter 7 Administrator F
unctions
C
HECKING THE
S
OFTWARE
V
ERSION AND
S
ERIAL
N
UMBER
A
DMINISTRATOR
F
UNCTIONS
C
HAPTER
7
&KHFNLQJWKH6RIWZDUH9HUVLRQDQG6HULDO1XPEHU
This section explains how to check the software version installed in the welding power source.
The software version is managed as below.
There are two methods for checking: Checking at the LCD panel, and checking at the digital meter.
•
How to check at the LCD panel
1.
In the MENU screen, turn the screen operation knob to place the cursor on “PRODUCT INFORMATION”, and
press the knob.
• How to check at the digital meter
1.
Turn OFF the power switch.
2.
Press and hold the UNIT CHANGE key and turn ON the power switch.
3.
After checking, turn off the power switch.
B
The power LED switch lights off. The status returns to normal when the power switch is turned on.
B
The product information will be displayed on the LCD
panel.
‡ When the screen operation knob is turned, information on the
peripheral equipment will be displayed (“Not connected” if not
connected).
●
To return to the MENU screen after checking, press the
CANCEL key.
B
The Product No. is displayed on the left and right digital
meters.
B
The display changes every time the UINIT CHANGE key
is pressed.
(The display order of 5 or later is for manufacturer's
management. It is not necessary for the user to check it.)
‡ The serial number is not displayed by this method.
Display order
Display Content
Left digital meter Right digital meter
1 Product No Product No
2 Main version "- - -"
3 Minor version Minor version
4 "- - -" Extended version
5 or later Version for management
P##### ### ### ### ###
P rodu ct
M ai n v er s io n
Ext e n ded v er s io n
M i n or v er s io n
3URGXFW1R
3
352'8&7,1)2
0(18
｝
S o ft ware
v er s io n
M a n u f a ct uri n g
n u mb er
6(/(&7 6:,7&+
3
3
3
O N
+