OTC Welbee M350 II, Руководство пользователя

Страница: 19 / 148

17
Chapter 2
Product Specification
and Configuration
P
RODUCT
C
ONFIGURATION
P
RODUCT
S
PECIFICATION AND
C
ONFIGURATION
C
HAPTER
2
• At TIG welding:
T I P S
• The TIG valve kit, which is an optional accessory item, enables you to lay piping in the
welding power source. When using this kit, turn ON F81.
(
6.7.2.48 F81: TIG Mode torch switch setting)
• For the procedure for installing the TIG valve kit (optional accessory) to the welding power
source, refer to the instruction manual of the TIG valve kit. Connect the kit to the torch as
shown in the following figure.
• For WB-M502, in order to use the TIG valve kit, the power cable for torch side (BKPJT-60R2)
is necessary.
No. Name
Required
component
Optional
accessories
Remarks
1 Gas regulator To be prepared by the customer.
(
2.2.3
-
Accessory (not supplied))
2 Welding torch
3 Gas hose [10 ft (3 m)]
9
(*1) Included in feeder (*2)
4 Power cable for base metal side
9
(*1) Included in feeder
5 Shield gas
To be prepared by the customer.
(
2.2.3
-
Accessory (not supplied))
6 Digital remote control (optional)
9
E-2454 (*1)
7 Analog remote control [10 ft (3 m)] (optional)
9
K5804S00 (*1)
8
TIG valve kit (optional)
9
K8197A00
9
Analog foot control (optional)
9
KM3022
*1: Optional extension cable and hose [16 ft/33 ft/50 ft/66 ft (5 m/10 m/15 m/20 m)] are also available.
( 2.2.4
-
Optional accessories)
*2: The TIG valve kit, which is an optional accessory item, enables you to lay piping in the welding power source.
( 2.2.4
-
Optional accessories)
4
3
1
2
6
5
8
7
9
Base metal
Welding power source
Power cable for
torch side
(BKPJT-60R2)
TIG valve kit TIG valve kit