background image

P.O.Box 1, Hamamatsu, Japan

IMPORTANT NOTICE

This manual has been provided for the use of authorized Yamaha Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifi cally Yamaha Products, are already known 
and understood by the users, and have therefore not been restated.

WARNING:

 

Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, 
destruction of expensive components, and failure of the product to perform as specifi ed.  For these reasons, we advise 
all Yamaha product owners that any service required should be performed by an authorized Yamaha Retailer or the 
appointed service representative.

IMPORTANT:

 The  presentation  or  sale  of  this  manual  to  any  individual  or  fi rm  does  not  constitute  authorization,  certifi cation  or 

recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.

The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover.  The research, engineering, and service 
departments of Yamaha are continually striving to improve Yamaha products.  Modifi cations are, therefore, inevitable and specifi cations 
are  subject  to  change  without  notice  or  obligation  to  retrofi t.    Should  any  discrepancy  appear  to  exist,  please  contact  the  distributor's 
Service Division.

WARNING:

 

Static  discharges  can  destroy  expensive  components.    Discharge  any  static  electricity  your  body  may  have 
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).

IMPORTANT:

 Turn the unit OFF during disassembly and part replacement.  Recheck all work before you apply power to the unit.

SERVICE MANUAL

 CONTENTS

TO SERVICE PERSONNEL  ............................................2
SYSTEM COMPOSITION / 

システム構成

  .......................4

PANEL LAYOUTS  ...........................................................5
REMOTE CONTROL PANELS  
..................................... 11
SPECIFICATIONS / 

参考仕様

  ....................................... 12

INTERNAL VIEW  .......................................................... 15
SERVICE PRECAUTIONS / 

サービス時の注意事項

  ..... 16

DISASSEMBLY PROCEDURES / 

分解手順

  ................. 17

UPDATING FIRMWARE / 

ファームウェアのアップデート

  ..................................26

PROTECTION DISPLAY / 

プロテクションの表示

  ........29

BLOCK DIAGRAMS  ......................................................31
WIRING DIAGRAM  
.......................................................35
PRINTED CIRCUIT BOARDS  
.......................................36
CIRCUIT DIAGRAMS  
....................................................39
REPLACEMENT PARTS LIST  
......................................46
REMOTE CONTROL  
.....................................................49
PAIRING THE CENTER UNIT AND SUBWOOFER MANUALLY / 

センターユニットとサブウーファーを手動でペアリングする

  .....50

'17.06

Copyright (c) Yamaha Corporation All rights reserved.

This manual is copyrighted by Yamaha and may not be copied or

redistributed either in print or electronically without permission.

1 0 1 3 9 6

YAS-207/ATS-2070

FRONT SURROUND SYSTEM

NS-WSW42

YAS-CU207/ATS-CU2070

CENTER UNIT

WIRELESS SUBWOOFER

Notes:

  •  When accepting a repair order from the user, it is recommended to receive the YAS-CU207/ATS-CU2070 

and NS-WSW42 as a set for the repair work.

•  Turning on the power to YAS-CU207/ATS-CU2070 makes wireless connection of YAS-CU207/ATS-CU2070 

and NS-WSW42 possible. After the repair work, if their wireless connection is not made automatically, makes 
it possible manually. (For details, refer to “PAIRING THE CENTER UNIT AND SUBWOOFER MANUALLY”.)

注意:

  ・  ユーザーから修理依頼を受ける際、YAS-CU207 と NS-WSW42 をセットでお預かりすることを推奨します。

・  YAS-CU207 の電源をオンにすると YAS-CU207 と NS-WSW42 は自動的に無線接続されます。修理完了後、

電源を入れても自動的に無線接続されない場合は手動で無線接続を完了してください。(詳細は “センター
ユニットとサブウーファーを手動でペアリングする” を参照してください。)

The 

YAS-207/ATS-2070

 consists of the YAS-CU207/ATS-CU2070 and NS-WSW42.

YAS-207

は、YAS-CU207 および NS-WSW42 で構成されています。

Y

A

S-CU207/A

TS-CU2070/

NS-WSW42

Summary of Contents for YAS-207



















































Reviews: