On-Net Surveillance Systems, Inc.
NetDVMS 6.5f User Manual
Input, Events & Output
95
Access: You access the Slave Administration window by clicking the Slaves... button in the
Image
Server Administrator window
.
Adding a Slave Server
To add a slave server, click the Slave Administration window's Add Slave... button, specify the
host name of the slave server, specify the required port number, and click OK. This will add the
slave server to the Slave Administration window's list of slave servers.
Tip: Instead of specifying a host name when adding a slave server, you may specify the IP
address of the slave server. Simply type the IP address in the Hostname field when adding the
slave server. Remember that if on a local network, the local IP address of the slave server must
be used.
Before you start using your master/slave setup, remember to verify that:
•
Required users have be defined on the master server as well as on each of the slave
servers.
•
Outside Access has been enabled on all involved servers, and ports mapped accordingly in
the routers or firewalls used, if the slave servers are to be accessed from the internet.
Removing a Slave Server
To remove a slave server from the Slave Administration window's list of slave servers, select the
slave server in the list and click the Delete Slave button.
Users & User Rights
The Image Server Administrator's User administration window lets you define access client users.
