On-Net Surveillance Systems, Inc.
NetDVMS 6.5f User Manual
NetMatrix Monitor
210
As part of the data exchange between computers on the NetMatrix system, other computers (exactly which
computers are defined as part of your NetMatrix Monitor application's configuration) are able to send commands to
your NetMatrix Monitor. The commands typically tell your NetMatrix Monitor to connect to—or disconnect from—a
video feed from a particular camera.
As part of the configuration, your NetMatrix Monitor application may have been set up to automatically accept all
received commands, in which case new video feeds will automatically be displayed in your NetMatrix Monitor
window.
If your NetMatrix Monitor has not been set up to automatically accept all received commands, you will
be prompted to accept all received commands before they are executed. When a command is
received, a small dialog will be displayed in the bottom right corner of your screen. The dialog will
display the IP address or hostname of the sender as well as information about the command itself.
To accept the command, click the Accept button. If you do not want to accept the command, click the Decline
button.
Alerts upon Executed Commands
As part of the configuration, your NetMatrix Monitor application may have been set up to automatically display
alerts each time a command is executed.
When this is the case, a small alert box will be displayed in the bottom right corner of your screen
upon each executed command. The alert box will inform you about the executed command.
The alert box will close automatically after 10 seconds. If required, you can close the alert box manually at any
time.
Shortcut Menus
Two shortcut menus are available when working with the NetMatrix Monitor application:
