On-Net Surveillance Systems, Inc.
NetDVMS 6.5f User Manual
Input, Events & Output
73
Field, Button
Description
Clicking the Clear all button is thus a quick way to specify that
archiving should not apply for any of the cameras listed.
Remember that only when you click OK, archiving is actually
disabled for the selected cameras.
Set all paths
Note: This button is only available if the Automatic path selection
check box is not selected.
Copies the selected path listing to all cameras listed in the Select
cameras for which the archiving function should apply section.
If you use the same archiving directory for all cameras, this can
save you having to manually specify identical paths for each
camera.
Example: You have specified the path
C:\MyFiles\MySurveillanceSystem for a camera. To quickly use this
path for all cameras, select the path listing and click the Set all
paths button.
Add target
Note: The button is only available if the Automatic path selection
check box is selected.
By clicking this button, you can add a new archiving target. When
you click the button, a path named New drive will appear in the
list. To specify a path simply click New drive to overwrite it. The
path you type must exist in the My Network Places folder. Note,
that the path you type will not get a drive letter. That is because it
is not a mapped drive. If it had been a mapped drive, it would
already have been in the list.
Note: You cannot delete a target you have added. Instead, if you
clear a check box for a target you have added manually and click
OK, the target will not be on the list the next time you access the
Archive setup window. However, the Archives folder at the target
destination will remain available for viewing recordings.
Static Archiving
Note: Specifying archiving locations for individual cameras is only possible if you have not selected
the Automatic path selection check box.
If the Automatic path selection check box is not selected, a default archiving location is specified for
each camera. The default archiving directory, called Archives, will be located at this location.
To specify another location for the archiving directory for a camera, either click the browse icon
next to the path listing for the required camera and browse to the required location, or click the
default path listing to overwrite it.
