Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 451 / 534

Ports used in Novell ZENworks Network Access Control
E
451
no
vd
ocx
(e
n)
24
Ma
rch 20
09
E
Ports used in Novell ZENworks
Network Access Control
The following table provides information about Ports used in Novell ZENworks Network Access
Control:
Table E-1
Ports in Novell ZENworks Network Access Control
Port Parties Description Comments
Ports used for testing endpoints:
88 (TCP)
89 (TCP)
Endpoint to ES When using agent-based
testing, the endpoint must point
(using a browser window) to
destination port 88 on the ES for
testing, which is redirected to
destination port 89 (end-user
access screens) on the ES. Not configurable
53 (TCP)
53 (UDP)
Endpoint to ES Domain Name Server (DNS).
When an endpoint is
quarantined in DHCP mode, it
uses the ES for its name server. Not configurable
3128 (TCP) Endpoint to ES Any endpoint configured to use
an autoproxy (DHCP endpoint
enforcement mode only), and
when using agent-based testing
and static routes, the destination
port is 3128 (squid) on the ES. Not configurable
137 (UDP)
138 (UDP)
139 (TCP)
ES to endpoint These ports are opened by
default when File and Print
Sharing is enabled, but are not
used by Novell ZENworks
Network Access Control. Configure on the firewall/router
between ES and endpoint
445 (TCP) ES to endpoint This port is first used for NMB
lookup (identify yourself) on
Windows endpoints. If this port
is not open, the endpoint cannot
be tested.
Then, this port is used for
testing endpoints with the
Agentless method.
NOTE: This port is opened by
default when File and Print
Sharing is enabled.
Configure on the firewall/router
between ES and endpoint