Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 127 / 534

System Configuration 127
no
vd
ocx
(e
n)
24
Ma
rch 20
09
1b Test successful message (final screen) — Enter the text for the final, test successful
window. Novell recommends that this text informs the end-user that the test was
successful and provides any additional helpful information such as instructions, notices,
and so on.
1c Footer (most screens) — Enter the text for the footer that appears on most of the end-user
windows. Novell recommends that this text includes a way to contact you if they need
further assistance. You can format the text in this field with HTML characters.
2 Click
ok
.
Specifying the End-user Test Failed Pop-up Window
To specify the end-user test failed pop-up window:
Home window>>System configuration>>End-user screens
1 Select the
Pop up an end-user notification when
an endpoint
fails one
or more tests
check box to turn the pop-up window on (clear the check box to turn it off).
2 Enter the customization information:
2a
Notification pop-up URL
— In the
Notification pop-up URL
text box,
the default is:
https://ServerIpaddress:89
This URL points to port 89 on the Novell ZENworks Network Access Control ES (the
default end-user screen that shows the test failed results), and is where the user is directed
to when they click the
Get details
button on the new pop-up window.
TIP: Enter a different URL if you have a custom window you want the users to see. For
example, you might have a location that provides links to patch or upgrade their software.
2b
Test failed pop-up message
— In the
Test failed pop-up message
text box, enter the message the end-user views on the standard pop-up window.
TIP: You can verify your changes to the end-user access screens immediately by pointing
a browser window to port 88 of your Novell ZENworks Network Access Control
installation. For example, if the IP address of your Novell ZENworks Network Access
Control installation is 10.0.16.18, point the browser window to:
http://10.0.16.18:88
3 Click
ok
.
3.17.7 Agentless Credentials
When Novell ZENworks Network Access Control accesses and tests endpoints, it needs to know the
administrator credentials for that endpoint. If your network uses a Windows domain controller and
the connecting endpoint is a member of a configured domain, Novell ZENworks Network Access
Control uses the information supplied to access and test the endpoint.
TIP: Setting windows credentials here sets them as default settings for all clusters. You can override
these settings on a per-cluster basis by selecting a cluster first, and then making changes in
Agentless credentials.