Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 208 / 534

208 Novell ZENworks Network Access Control Users Guide
no
vd
ocx
(e
n)
24
Ma
rch 20
09
12 Enter a single endpoint or list of endpoints separated by a carriage return using the endpoint IP
address, MAC address, NetBIOS name, or host name. Enter a range of IPs using a dash (-)
between or by using CIDR notation (see
Table 16-2 on page 338 ).
NOTE: You can leave the Domains and Endpoints areas blank if you do not want to assign
domains and endpoints to this policy.
TIP: ove the mouse cursor over the question mark (?) by the word Endpoints, then click on the
CIDR notation link to see the CIDR conversion table pop-up window.
13 Click the
Tests
menu option to open the
Tests
window:
Figure 6-8
Add NAC Policy, Tests Area
NOTE: The icons to the right of the tests indicate the test failure actions. See Section 6.4.3,
“Test Icons,” on page 215 .
14 Select a test to include in the NAC policy by clicking on the check box next to the test name.
15 Select a test by clicking on the test name to view the properties. For more information about
test properties, see
Section 6.4.2, “Selecting Test Properties,” on page 213 .
16
Select the test properties for this test. For more information about the specific tests, see
Appendix B, “Tests Help,” on page 393 .
17 Select an action to take when an endpoint fails this test (see Section 6.3.14, “Selecting Action
Taken,” on page 211 ).
18 Click
ok
.