Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 141 / 534

Endpoint Activity 141
no
vd
ocx
(e
n)
24
Ma
rch 20
09
4.1.4 Searching
To search the Endpoint activity window.
Home window>>Endpoint activity>>Search criteria area
Figure 4-5
Search Criteria
1 Select any or all of the following:
Š A
Cluster
from the drop-down list
Š
A
NAC policy
from the drop-down list
Š Enter any text string in any of the text boxes (you can also leave these blank)
2 Select one of the following from the
Endpoints must match
drop-down list:
Š all — Endpoints that match all of the search criteria are displayed.
Š
any — Endpoints that match at least one of the search criteria are displayed.
3
Click
Search
. The results area updates to match the search criteria specified, and the
background of the fields used in the search are highlighted as shown below:
Figure 4-6
Highlighted Fields
4 To refresh the
Endpoint activity
window to show all endpoint activity, click
reset
.
TIP: The search box is not case-sensitive. Searching matches entire words. You must enter wildcard
characters (*) to match substrings. For example, 192.168.*.
4.2 Access Control States
Novell ZENworks Network Access Control provides on-going feedback on the access status of
endpoints in the
Endpoint activity
window as follows: