manualshive.com logo in svg

Novell ZENworks Network Access Control 5.0, Руководство пользователя

Поделиться
Скачать
Novell ZENworks Network Access Control 5.0 Скачать руководство пользователя страница 472

472

Novell ZENworks Network Access Control Users Guide

no

vd

ocx 

(e

n)

  

24

 Ma
rch 20

09

Neither the name of the <ORGANIZATION> nor the names of its contributors may be used to 
endorse or promote products derived from this software without specific prior written permission. 

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

G.2.3  Open SSH 4.5p1

This file is part of the OpenSSH software.

The licences which components of this software fall under are as follows. First, we will summarize 
and say that all components are under a BSD licence, or a licence more free than that.

OpenSSH contains no GPL code.

1) Copyright (c) 1995 Tatu Ylonen <[email protected]>, Espoo, Finland

All rights reserved

As far as I am concerned, the code I have written for this software can be used freely for any 
purpose. Any derived versions of this software must be clearly marked as such, and if the derived 
work is incompatible with the protocol description in the RFC file, it must be called by a name other 
than "ssh" or "Secure Shell".

[Tatu continues]

However, I am not implying to give any licenses to any patents or copyrights held by third parties, 
and the software includes parts that are not under my direct control. As far as I know, all included 
source code is used in accordance with the relevant license agreements and can be used freely for 
any purpose (the GNU license being the most restrictive); see below for details.

[However, none of that term is relevant at this point in time. All of these restrictively licenced 
software components which he talks about have been removed from OpenSSH, i.e.,

- RSA is no longer included, found in the OpenSSL library

- IDEA is no longer included, its use is deprecated

- DES is now external, in the OpenSSL library

- GMP is no longer used, and instead we call BN code from OpenSSL

- Zlib is now external, in a library

- The make-ssh-known-hosts script is no longer included

- TSS has been removed

Содержание ZENworks Network Access Control 5.0























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды