Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 242 / 534

242 Novell ZENworks Network Access Control Users Guide
no
vd
ocx
(e
n)
24
Ma
rch 20
09
Configuring the Microsoft IAS RADIUS Server
For an explanation of how the components communicate, see Section 11.2, “Novell ZENworks
Network Access Control and 802.1X,” on page 236 .
Now that you have the RADIUS server installed, you need to log into it and perform the
configuration steps described in this section.
To configure the RADIUS server:
1 Log into the RADIUS server.
2 From the RADIUS server main window, select
Start>>Settings>>Control
Panel>>Administrative Tools>>Internet Authentication Service.
3
Configure IAS to use Active Directory:
3a Right-click on
Internet Authentication Service (Local).
3b
Select
Register Server in Active Directory (
Figure 11-6 on page 242 ).
3c Click
OK
if a registration completed window appears.
4 Configure the RADIUS server parameters:
Figure 11-6
IAS, Register Server in Active Directory
4a Right-click on
Internet Authentication Service (local)
4b Select
Properties (
Figure 11-7 on page 242 ). The
Properties
window appears
( Figure 11-8 on page 243 ).
Figure 11-7
IAS, Properties Option