Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 83 / 534

System Configuration 83
no
vd
ocx
(e
n)
24
Ma
rch 20
09
8 Enter the
Password
with which to log into the device's console.
9 Re-enter the console password.
10 Enter the
Cisco port mask
in the text field. This specifies which characters within the
endpoint identifier returned by the Cisco device contain the bank and port information of the
endpoint. All offsets start at 0, so a mask of 2/34 indicates character 3 for the bank and
characters 4 and 5 for the port. If the Cisco device were to return 50210 for an endpoint, a port
mask of 2/34 would indicate that the endpoint is on bank 2 and port 10 (2/10), where 210 are
the third, fourth and fifth bytes in the identifier.
11
Enter the
Reconnect idle time
. This is the amount of time in milliseconds that a telnet /
SSH console can remain idle or unused before it is reset.
12 Select the
Show scripts
plus symbol to show the following scripts:
Š
Initialization script — The expect script used to log into the console and enter enable
mode.
Š Re-authentication script — The expect script used to perform endpoint re-
authentication.
Š
Exit script — The expect script used to exit the console.
13 Click
ok
.
TIP: Click revert to defaults to restore the default settings.