Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 261 / 534

802.1X Quarantine Method 261
no
vd
ocx
(e
n)
24
Ma
rch 20
09
17e Select the
Dial-in
tab.
17f
In the Remote Access Permission area, select the Allow Access radio button.
17g Select the
Account
tab.
17h
Verify that you are using Microsoft’s version of the challenge-handshake authentication
protocol (CHAP) MSCHAPv2. If for some reason, you cannot upgrade to MSCHAPv2 at
this time, perform the following workaround for MSCHAPv1:
In the
Account options
area, select the
Store password using
reversible encryption
check box.
NOTE: If there are existing user accounts in your Active Directory installation when you
enable reversible encryption, the passwords must be reset (either by the user or by the
system administrator) before reversible encryption takes effect.
17i
Click
OK
.
17j Repeat from step a for each user account.
Proxying RADIUS Requests to an Existing RADIUS Server Using the Built-in Novell
ZENworks Network Access Control RADIUS Server
TIP: For an explanation of how the components communicate, see Section 11.2, “Novell
ZENworks Network Access Control and 802.1X,” on page 236 .
To configure Novell ZENworks Network Access Control to proxy RADIUS requests to
an existing RADIUS server:
1 To configure the RADIUS server to proxy requests to your existing RADIUS server:
1a
Log in to the ES as root via SSH.