Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 41 / 534

System Configuration 41
no
vd
ocx
(e
n)
24
Ma
rch 20
09
1a Enter a name for the Enforcement cluster in the
Cluster name
field.
1b
Select a NAC policy group from the
NAC policy group
drop-down list (see
Chapter 6, “NAC Policies,” on page 201 ).
2 Click
Quarantining
in the
Add Enforcement cluster
window. Complete the steps
described in Section 3.10, “Quarantining, General,” on page 70 .
TIP: You can also access the quarantine area Enforcement cluster by clicking Quarantining in
the System configuration window (see Section 3.10, “Quarantining, General,” on page 70 for
more information).
3 The following cluster settings take on default values set from the
System configuration
window. To set up operating parameters that differ from those default settings, select the menu
item of the settings you want to change, then select the
For this cluster, override
the default settings
check box, and make the desired changes. Refer to the sections
listed below to set up the default values, or for more information on the specific settings.
Š
Testing methods — See Section 3.17.1, “Testing Methods,” on page 117
Š
Accessible services — See Section 3.17.3, “Accessible Services,” on page 119
Š
Exceptions — See Section 3.17.4, “Exceptions,” on page 121
Š
Notifications — See Section 3.17.5, “Notifications,” on page 123
Š
End-user screens — See Section 3.17.6, “End-user Screens,” on page 125
Š
Agentless credentials — See Section 3.17.7, “Agentless Credentials,” on page 127
Š Logging — See Section 3.18, “Logging,” on page 131
Š
Advanced — See Section 3.19, “Advanced Settings,” on page 133