Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 441 / 534

HA Bypass Card 441
no
vd
ocx
(e
n)
24
Ma
rch 20
09
Table C-2
Bypass STATUS
Table C-3
Bypass STATES
C.6 Operating the Bypass Card
IMPORTANT: If you are connected using SSH and use the following instructions to force a bypass
card into bypass mode, you will lose connectivity.
To force the system into bypass mode:
1 Log into the Novell ZENworks Network Access Control server via SSH or directly.
2
Enter the following command:
service bypass bypass
To force the system into a closed or normal mode, so traffic flows through it:
1 Log into the Novell ZENworks Network Access Control server via SSH or directly.
2 Enter the following command:
service bypass active
To determine what state the system is in:
1 Log into the Novell ZENworks Network Access Control server via SSH or directly.
2 Enter the following command:
service bypass status
State Description
OPEN This host is presently being bypassed.
CLOSED This host is presently passing traffic directly.
State Description
DEFAULT The card has not been manually controlled (forced into any particular
mode) since it came on line.
NORMAL Forced into NORMAL mode, which resumes the last known state.
FORCED RUNNING Forced into RUNNING mode, traffic is going across the bridge.
FORCED BYPASS Forced into BYPASS mode, traffic is routing around the host.