Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 270 / 534

270 Novell ZENworks Network Access Control Users Guide
no
vd
ocx
(e
n)
24
Ma
rch 20
09
2f Select an EAP type from the drop-down list. For this example, select
MD5-Challenge
.
IMPORTANT: This EAP type must match the EAP type selected in Section 11.3.1,
“Setting up the RADIUS Server,” on page 240 , Step 7q on page 248 .
2g Clear or select the
Authenticate as computer when computer
information is
available check box. The choice is yours.
2h Click
OK
.
3 Select to reboot if necessary.
Windows Vista Setup
NOTE: Frequently when performing actions on Windows Vista, the User Account Control window
pops up and asks you to select Continue to authorize the action. The instructions in this section do
not include this step.
To enable a Windows Vista endpoint for 802.1X:
Windows desktop>>Start>>Control Panel>>Administrative Tools>>Services
1 Start the wired service:
1a Double-click on
Wired AutoConfig
. The
Wired AutoConfig Properties
window appears.
Figure 11-36
Wired AutoConfig Properties
1b Select
Automatic
from the
Startup type
drop-down list.
1c Click
Start
in the
Service status
area.
1d Click
OK
.
1e
Close the
Services
window.
2 Configure the network connections: