Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 52 / 534

52 Novell ZENworks Network Access Control Users Guide
no
vd
ocx
(e
n)
24
Ma
rch 20
09
1 Server status is shown in the Network settings area.
2 Click
ok
or
cancel
.
3.5.2 Modifying MS Network Settings
IMPORTANT: Back up your system immediately after changing the MS or ES IP address. If you
do not back up with the new IP address, and later restore your system, it will restore the previous IP
address which can show an ES error condition and cause authentication problems. See
Section 3.15,
“Maintenance,” on page 114 for instructions on backing up and restoring your system.
To modify MS network settings:
Home window>>System configuration>>Management server
WARNING: Changing the MS network settings will cause the network interface to restart.
1
Click
edit network settings
in the
Network settings
area.
Figure 3-9
Management Server Network Settings
2 Enter the values you want to modify:
Š
Enter a new name in the
Host name
text field. For example,
garp.mycompany.com
NOTE: Select names that are short, easy to remember, have no spaces or underscores, and
the first and last character cannot be a dash (-).
Š Enter a new address in the
IP address
text field. For example,
192.168.153.35
Š
Enter a new netmask in the
Network mask
text field. For example,
255.255.255.0
Š
Enter a new gateway in the
Gateway IP address
text field. For example
192.168.153.2
Š
Enter one or more DNS resolver IP addresses, separated by commas, semicolons, or
spaces in the
DNS IP addresses
text box. For example:
10.0.16.100,10.0.1.1
3 Click
ok
.