Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 80 / 534

80 Novell ZENworks Network Access Control Users Guide
no
vd
ocx
(e
n)
24
Ma
rch 20
09
Š
Nortel — See Section 3.11.14, “Nortel,” on page 101 .
Š
Other — See Section 3.11.15, “Other,” on page 103 .
7 Click
ok
.
3.11.4 Testing the Connection to a Device
The test connection area has different options based on the switch you select:
Š
Cisco CATOS, Cisco IOS, Enterasys, Extreme, Foundry switches — See Figure 3-24 on
page 80 .
Š
ProCurve, Nortel, Other switches — See Figure 3-25 on page 80 .
To test the connection to an 802.1X device:
Home window>>System configuration>>Quarantining>>802.1X Quarantine method radio button
NOTE: You must have already added devices for them to appear in the 802.1X devices area. You
can also test the device as you add it.
1
In the
802.1X devices
area, click
edit
next to the device you want to test. The
802.1X
device
window appears. The
Test connection to this device
area is near the
bottom of the window:
Figure 3-24
Add 802.X Device, Test Connection Area Option 1
Figure 3-25
Add 802.X Device, Test Connection Area Option 2
2 For ProCurve, Nortel, Other switches ( Figure 3-24 on page 80 ),:
2a Select the
Method
to execute the re-authentication command in test:
Š 802.1X
Š
MAC auth
2b Enter the port of the endpoint being tested in the
Port
text field.
2c Enter the MAC address of the endpoint being tested in the
MAC address
text field.