Novell ZENworks Network Access Control 5.0, Руководство пользователя

Страница: 102 / 534

102 Novell ZENworks Network Access Control Users Guide
no
vd
ocx
(e
n)
24
Ma
rch 20
09
8 Enter the
Password
with which to log into the device's console.
9 Re-enter the console password.
10 Enter the
Enable mode user name
.
11 Enter the password with which to enter enable mode.
12 Re-enter the enable mode password.
13 Enter the
Reconnect idle time
. This is the amount of time in milliseconds that a telnet /
SSH console can remain idle or unused before it is reset.
14 Select the
Device is stacked
check box if the device is in a stacked configuration.
15
Select the
Show scripts
plus symbol to show the following scripts:
Š
Initialization script — The expect script used to log into the console and enter enable
mode.
Š
Re-authentication script — The expect script used to perform endpoint re-
authentication.
Š Exit script — The expect script used to exit the console.
16 Click
ok
.
TIP: Click revert to defaults to restore the default settings.